40lbs 12V Thrust Electric Trolling Outboard Motor Heavy Duty Kayaks Boat Engine, Electric Outboard Motor Trolling Brush Motor Fishing Boat Engine 6km/h 1700R/Min

Specification:Model: L40Speed Control: F5-R2Motor Type: Brush MotorRated Voltage(V): 12Rated Speed(R/min): 1700Rated Current(A): 34Rated Power(W): 408Control Handle: Retractable Maximum Speed(km/h): 6Noise: 50dbBattery Model: 12V 100A BatteriesNet Weight: 7.8kg/17.2lbsGross Weight: 9.3kg /20.5lbsPropeller Model: 3 Leaves, 7.6*22.9cm/3*9inRod Length: 76cm/30inchPackage Size: 102*41*16cm (40.16*16.14*6.30inch)Installation:1. Tear off the sticker at the spring on the handle.2. Take out the handle, and align the handle with the interface at the inner shell of the handle.3. Press the handle spring with one hand and push the handle in with the other hand. After a crunching sound is heard, the handle is installed.4. Take out the cylindrical card pin and insert it into the round hole of the drive rod (note that the length of both ends needs to be consistent).5. Align the back of the propeller with the card slot and the card pin horizontally, and then tap into the propeller with force.6. Put in the card flap, then screw the nut to complete the installation.7. Take the fins out of the box and insert them into the fin slot. 8. Put the included screws into the screw holes of the fins and put the nuts into the other end. Hold them down.9. Then tighten the screws with the Phillips screwdriver.Package Included:1*Trolling Motor1*Power Propeller1* Circuit Breaker Protector1*Battery Clamp1 Set of Screws1*English Manual

• 【Great Durability】The trolling motor is made of pure copper, which has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance.High Efficiency: The trolling motor with a pure copper motor can overcome huge water resistance to increase the speed of driving and improve its efficiency.Fin Streamline Design: When it collides with an object underwater, the design can protect the propeller that is running at high speed.
• 【Non-deformable】The suspension bracket is made of high-strength aluminum alloy, which can ensure that the bracket is not deformed by repeated disassembly and installation.Easy to Drive: The main rod is made of aluminum. Its lightweight will not increase the entire weight of your boat and the difficulty of driving.Circuit Breaker Protector: The trolling motor with overload, short-circuit, and under-voltage protection settings can protect wiring and power.
• 【Adjustable Gears】The fixed tiller has 5 forward and 3 reverse speeds. You can smoothly switch the speed and change the direction during driving.Real-time Monitoring of Power: The top of the thruster has a real-time display of the battery power, allowing you to check the power situation any time and prepare for charging in advance to avoid running out of power in the middle of the voyage.Its depth and angle can be freely adjusted according to the actual situation and your special needs.
• 【Propeller Design】The propeller is designed with a multi-dimensional optimization iterative method to improve propulsion efficiency and reduce propeller losses.Tightened Brackets: The tightened brackets are used to secure the thruster and transoms of the ship so that the thruster will not fall from your boats.The trolling motor is suitable for a variety of small watercraft, such as fishing boats, dinghies, and inflatable boats.
• 【Reminder】Please read the attached manual completely before use. And pay particular attention to the safety instructions included. Don't start the motor on the bank. If you want to test the motor, it should be done in the river.Don't use the motor when no water comes out of it, and then check whether the pump impeller or the water outlet is blocked.Do not switch gears too quickly. You should switch from one gear to another.